Zirve Yazılım
-
Feed rate control
Save milling time and prevent tool breakage
Calculating Cut Load, Add Optimized Feed Rate Automatically
Cutting load is continuously changing along the work shape.
For this part, normal feed rate would be F1000.
But now, NCBrain controls feed rates, from F800 to
F4000 automatically.
Faster and safer machining is possible.
Air Cut delete
Save time, easy CAM job
Unnecessary tool path called ‘Air Cut’ reaches normally to
5% to 30%.
This Air Cut paths should be deleted.
NCBrain deletes unnecessary Air Cut paths automatically,
and make easy CAM job accordingly.
Few load path delete
Reduce time in roughing & semi
This function makes rapid machining on thin load area
automatically.
The small remained load will be cut later by necessary
process.
G0 height control
reduce time & prevent collision
Along the shape and height of stock, G0 rapid motion shall be controlled for higher efficiency.
Also NCBrain creates approach paths as G01 code.
RPM control
along the contact point of tools.
Spindle should be changed by different condition such
as along the work shape and location. NCBrain makes it possible accordingly.
Arc function
Good for old machine in saving time and
high quality
Line(G1) to Arc(G2, G3) Translation and Look ahead
Feed Control for Adjusting NC data to old Controller
Machine
As a function of old-type instrument, it solves problems
by circling of corner part, which has large data and
accelerating/decelerating automatically. (General movie)
as you know, there are many problems of over cutting
quality lowering by dropping feed and shaking at the
corner. But, (ARC movie) the following shows smooth
ac/decelerating and clear manufacturing. The processing
time reduced 30% and the quality increased
Bull-nose feed rate control
Tool life longer, time reduction
According to entry and location, feed rate of bull-nose
should be controlled like an example above.
This can reduce time and make tool life longer.
-
